IMR 1400C
The IMR 1400C measures and calculates all the needed parameters to perform a thorough combustion test. It measures Flue Gas Temperature, Oxygen O2 and Carbon monoxide CO. Combustible calculations like Losses, Excess Air, Combustion Efficiency and Carbon dioxide CO2 are standard.
It can optionally measure Amient Temperature, Nitric Oxide NO, Nitrogen Dioxide NO2, Sulfur Dioxide SO2 and/or Hydrocarbons HC. Draft and Soot measurements are optional available as well.
​
Further features include:
-
Simultaneous display of eight measured parameters on the illuminated LCD.
-
Integrated thermal printer (IMR 1400cp)
-
Engineering units like ppm,mg,mg/kWh,mg(ref.O2) units are selectable.
-
Case with additional space for spare parts.
.
IMR 1400CP
The IMR 1400CP measures and calculates all the needed parameters to perform a thorough combustion test.
It measures flue gas temperature, air temperature, Oxygen O2, Carbon monoxide CO. It can optionally measure Nitric Oxide NO, Nitrogen Dioxide NO2, Sulfur Dioxide SO2 and/or Hydrocarbons HC. Combustible calculations like Losses, Excess Air, Combustion Efficiency and Carbon dioxide CO2 are standard as well as the measurements for Draft and Soot.
Further features include:
-
Simultaneous display of eight measured parameters on the illuminated LCD.
-
Integrated thermal printer and RS232/USB interface.
-
Measurement printout or service printout, both include date,time and fuel type.
-
Engineering units like ppm,mg,mg/kWh,mg(ref.O2) units are selectable.
-
Automatic and manual CO-bypass.
-
Memory for 220 measurements.
-
Case with additional space for spare parts.
​
IMR 1440FL
The exhaust gas analyzer IMR 1440FL is designed to measure exhaust gases on Forklift Trucks, Generators, Cars, and heavy Machinery that are powered by Diesel or Gas Engines. According to regulations it can measure soot on diesel engines and Carbon Monoxide CO on gas powered forklift trucks. Some worldwide regulations require Nitric Oxides NOx, therefore this analyzer can be equipped with a NOx sensor as well.
The IMR 1440COFL is equipped with two CO sensors. One CO sensor operates in the low range and another CO sensor operates in the high range.
This new model can also measure the exhaust gas pressure before the soot filter. The measurement of the flue gas temperature, oxygen, carbon dioxide and excess air are helpful for diagnostic reasons and the adjustment of the engine to minimize CO emissions.
​
Further features include:
-
Rugged case with additional compartments
-
Hold all accessories in a single case!
-
Menu navigation (Soot, CO or Pressure measurement)
-
Condensation trap with integrated filter
-
4-line, backlit LCD Display for simultaneous display of 8 values
-
Rechargeable battery with status indicator; up to 6 hours
-
Volume controlled soot measurement with soot paper & soot scale
-
Exhaust gas pressure
IMR 2800P
The IMR 2800P measures and calculates all the needed parameters to perform a thorough emission test.
It measures flue gas temperature, air temperature, Oxygen O2, Carbon monoxide CO, Nitric Oxide NO and Sulfur Dioxide SO2. It can optionally measure Nitrogen Dioxide NO2, Sulfur Dioxide SO2, Hydrogen Sulfide, Hydrocarbons HC and much more. Combustible calculations like Losses, Excess Air and Carbon dioxide CO2 are standard as well as the measurements for Draft and optionally Soot.
​
Further features include:
-
23 Fuels are programmed – 4 fuels are free programmable
-
Automatic zero calibration
-
Integrated self-check program
-
Simultaneous display parameters on the illuminated display
-
Printer with programmable print out cycles
-
RS232 (DB9/USB)
-
Standard deviation and average value calculation